How to choose the right pvc boat
PVC boats
The appearance on the market of polyvinyl chloride radically changed the attitude towards the manufacture of inflatable boats, making a real revolution in this area. On all trade fronts, PVC models began to be crowded out by rubber airbags. This is explained by the fact that this material has high strength and unpretentious care. And the possibility of using additional equipment doubled the demand for them.
How to choose the right PVC boat
It is clear that this should be done based on its future use. What is it for, purpose, load capacity and size. The choice is influenced by many things, but first things first.
Material density
The determining factor to take into account when choosing. The more layers used in the manufacture of the material, the stronger it will be. But this also increases her weight. Accordingly, such a boat will be problematic to deliver to the reservoir.
In general, before looking for information about the possibilities of boats, we first determine your needs.
Boat PVC under the motor
If you need such a boat, then here are some recommendations for choosing it. The first concerns the material itself. A boat made of PVC with the possibility of using outboard motors must be made of reinforced material. It is stronger than usual, withstands more pressure and is not afraid of possible hard contacts with snags.
General characteristics of a PVC boat for a motor
To paint a complete picture of a reliable boat with the ability to install motors, you need to briefly list the following points:
- the material of manufacture is only reinforced;
- cylinders glued and welded, they have the same characteristics when using a well-known brand boat;
- material density 0.9-1.4 kg/m3;
- the number of layers used in the manufacture of cylinders is at least 7;
- sizes from 2.7 to 3.3 meters, when operated by one person;
- transom is stationary.
PVC Boat Operation
Any boat needs to be pumped up before use. Many people think that it is simple, just take a simple frog pump and that's it. This is one of the mistakes of novice fishermen who decide to launch a boat for the first time. Of course, it is possible to pump a PVC boat with such a pump, but it will take a lot of time and effort. Pumping will not allow the use of heavy motors, only medium power.
If you have other plans for its operation, then you need a powerful two-way pump with a pressure gauge. It will allow you to create the necessary pressure in the cylinders. But keep in mind, in hot weather, the air in the cylinder can heat up and expand, leading to a rupture.
Registration and license plates
According to Russian legislation, all watercraft must be registered with the GIMS of the Ministry of Emergency Situations before the first exit to the "big water". They should give the boat an identification number. It must be applied to the sides (cylinders) so that they can be clearly seen, and duplicated in a hidden place.
The second number is not a whim of GIMS, but protection from thieves. It is usually applied under the bottom, and covered with payol. According to the rules, the height of the registration plate on the sides should be 10 cm. If possible, even more. For application, waterproof paints or stickers are used.
Also, when registering a boat in the GIMS, a safety memo is issued, providing for the presence in the boat of special equipment prescribed in its passport.
Which company to choose a PVC boat
Today, boats are produced by a huge number of companies, and every year there are more and more of them. And any company, first of all, pursues the goal of making a profit, and not everyone is trying to improve the performance of boats by releasing the same type of models, according to old patterns. In this case, it is difficult to talk about quality, and when choosing a particular model, first of all, read the information about the manufacturer in the passport.
Small companies that "stamp" inflatable boats usually do not indicate any information, and in this case it is better to refuse to purchase this model.
It is simply impossible to list all known models, but it is worth mentioning some that use special fishermen's requests:
- Norvik. This is a modern boat, presented by the St. Petersburg company - Norvik Boat. Large selection of models for hunting, fishing and recreation. According to user reviews, boats from this manufacturer are ergonomic and comfortable. A well-thought-out seating system that allows you to adjust their location relative to the oarlocks makes them more convenient in terms of control.
- Altair. Also a representative of the St. Petersburg school - ALTAIR-Pro. It is distinguished by high driving performance, fast access to and predictable behavior on high waves, when maneuvering. An inflatable keel and 4 independent compartments ensure the safety of boats of this brand. Reinforced keel, transom and bottom, allow you to use any model of outboard motors. And the comfort of use is provided with soft lining.
Summing up all of the above, a clear picture emerges of the purchase of a PVC inflatable boat. And the two presented models are only a drop in a large ocean of variety of models on the market. The choice is yours, be guided by these recommendations, and then you will be able to choose the right boat according to your goals.
