Sail 4 secondary power source.

Siberian Arsenal Sail 12-4.5M - the power supply is designed to provide uninterrupted power supply to fire alarm devices, video surveillance cameras, electromechanical locks and other consumers at a rated voltage of 12 V DC. The redundant secondary power supply source Siberian Arsenal Sail 12-4.5M has light indicators on the front panel: "NETWORK" indicates the presence of mains voltage; "OUTPUT" indicates the presence of the output voltage or the presence of a fault.

On the side panel there is an "Output" switch designed to turn on/off the output voltage. When the "Exit" switch is disabled, the "EXIT" indicator lights up red and a single-tone sound signal is emitted. The blocking of the output voltage shutdown is carried out by closing the JP jumper installed on the board. When powered from the mains and when the overload protection is triggered, the +12V output is turned off, the "OUTPUT" indicator lights up red and a single-tone sound signal is emitted.

When powered from the mains or from the battery and when the output is short-circuited, the FU2 fuse blows, the "OUTPUT" indicator lights up in red and a single-tone sound signal is emitted. Continuous operation of IVEPR in short circuit or overload mode is not allowed.

The battery is charged in the buffer mode with a voltage of 13.7 ... 13.9 V. When the battery is deeply discharged, the +12V output is turned off, the "OUTPUT" indicator lights up in red and a single-tone sound signal is emitted. When a discharged battery is inserted into the source, the "NETWORK" indicator lights up in yellow until the battery is charged.

Peculiarities:
- Metal case.
- Power supply "Sail 12-4.5M (Sail-6M)" is carried out from an alternating current network of 50 Hz with a voltage of 160 V to 250 V or from a built-in battery with a nominal capacity of 7 Ah / 12Ah and a voltage of 12 V.
- Preservation of working capacity at reduced power supply from the AC mains 50 Hz to 160 V.
- Ability to work with overcurrent and capacitive loads up to 16000 uF.
- Protection against "polarity reversal" and deep discharge of the battery.
- Reduced ripple voltage at the output (no more than 30 mV peak-to-peak).
- The efficiency of the source at rated load when powered from the mains in the range from 160 to 250 V is not less than 85%.
- Sound signal in case of short circuit or overload when powered by 220 V or from the built-in battery.
- Two LED indicators allow you to visually control the presence of voltage in the network, the state of the battery and the voltage at the output of the source.
By purchasing the Siberian Arsenal Sail 12-4.5M in the Lider-SB trading house, you get a quality product at an excellent price, as well as competent technical support.

Sail-4 (Sail 12-1P version 1)

Description Parus-4 (Sail 12-1P version 1)

Redundant source of secondary electrical power Parus-4, which serves to maintain operability, during a power outage in the AC network, such fire and security and security alarm devices as electromechanical locks, detectors, and so on. Housing design Parus-4 provides for the possibility of mounting it in a vertical position on walls or other vertical surfaces. The performance characteristics of the device Parus-4 allow automatic switching of consumers to battery power, as well as light indication of the network status.

Designation Sail-4 version 1 (Sail 12-1P version 1)

Sail 12-1P isp. 1 (Sail-4) is used to ensure the continuous operation of devices that require a supply voltage of 12 V, and is designed for round-the-clock operation.
When the IVEP overload protection is triggered, the +12V output is turned off, the "+12V" indicator flashes red and an intermittent sound signal is emitted.
Restoration of the output voltage after the removal of a short circuit or overload occurs after 20...30 s. Continuous operation of the IVEP in the short circuit or overload mode is not allowed.
IVEP uses the "smooth" switching on of the output voltage, so the delayed appearance of the output voltage indication is normal.
The battery is charged in buffer mode with a voltage of 13.7:13.8 V.
When the battery is deeply discharged, the +12V output is turned off, the "Battery" indicator goes out, the "+12V" indicator briefly flashes red and a short-term single-tone signal is emitted. When a deeply discharged or defective battery is installed in the IVEP, the "ACB" indicator does not turn on until the battery is charged.

Features Sail-4 version 1 (Sail 12-1P version 1)

• Ability to work with overcurrent and capacitive loads up to 4700 uF.
• Two outputs for connecting the load, each output has a separate filter
• Electronic protection:
  - when the battery is reversed
  - at short circuit
  - when overloaded in the load
  - from deep discharge of the battery
• Automatic restoration of the output voltage after the removal of a short circuit or overload.
• Sound alarm during the transition between modes and during critical operating modes (overload and short circuit).
• To block the shutdown of the +12 V output, a jumper J1 is installed on the board.
• Three LED indicators allow you to visually control the presence of voltage in the network, the state of the battery and the voltage at the output of the source.

Specifications Parus-4 version 1 (Sail 12-1P version 1)

Availability and priceParus-4 specified by the manager.

PURPOSE:

Sail 12-4.5M "Sail-6M" is designed to provide uninterrupted power supply to fire and security alarm devices, video surveillance cameras, electromechanical locks and other consumers at a nominal voltage of 12 V DC.

The redundant source of secondary power supply "Sail 12-4.5M (Sail-6M)" has light indicators on the front panel: "NETWORK" indicates the presence of mains voltage; "OUTPUT" indicates the presence of the output voltage or the presence of a fault.

On the side panel "Sail 12-4.5M (Sail-6M)" there is an "Output" switch designed to turn on / off the output voltage. When the "Exit" switch is disabled, the "EXIT" indicator lights up red and a single-tone sound signal is emitted. The blocking of the output voltage shutdown is carried out by closing the JP jumper installed on the board.

When powered from the mains and when the overload protection is triggered, the +12V output is turned off, the "OUTPUT" indicator lights up red and a single-tone sound signal is emitted.

When powered from the mains or from the battery and when the output is short-circuited, the FU2 fuse blows, the "OUTPUT" indicator lights up in red and a single-tone sound signal is emitted.

Continuous operation of IVEPR in short circuit or overload mode is not allowed.

The battery is charged in buffer mode with a voltage of 13.7 ... 13.9 V.

When the battery is deeply discharged, the +12V output is turned off, the "OUTPUT" indicator lights up red and a single-tone sound signal is emitted. When a discharged battery is installed in "Sail 12-4.5M (Sail-6M)", the "NETWORK" indicator lights up yellow until the battery is charged.

PECULIARITIES:

Metal case;
- Power supply "Parus 12-4.5M (Parus-6M)" is carried out from an alternating current network of 50 Hz with a voltage of 160 V to 250 V or from a built-in battery with a nominal capacity of 7 Ah / 12 Ah and a voltage of 12 V;
- Preservation of working capacity at reduced power supply from the AC mains 50 Hz to 160 V;
- Ability to work with current overload and capacitive load up to 16000 uF;
- Protection against "polarity reversal" and deep discharge of the battery;
- Reduced ripple voltage at the output (no more than 30 mV peak-to-peak);
The efficiency of the source at rated load when powered from the mains in the range from 160 to 250 V is not less than 85%;
- Sound signal in case of short circuit or overload when powered by 220 V or from the built-in battery.
- Two LED indicators allow you to visually control the presence of voltage in the network, the state of the battery and the voltage at the output of the source.

SPECIFICATIONS:

Constant output voltage with mains present: 13.0...14.0 V
Constant output voltage in the absence of a network: 10.0 ... 13.0 V
Ripple voltage value: 30 mV
Output current: 4.5A
Supply voltage (AC current): 160...250 V
Mains power: 95 VA
Nominal backup battery capacity: 7 or 12 Ah
Operating temperature range: -10... 40 °C
Weight without battery: 2.5 kg
Dimensions: 225x190x115 mm
Mean time between failures of the device in armed mode or disarmed mode, not less than: 40,000 h
Service life: 10 years