Homemade alarm. Do-it-yourself sound piezo emitter

Bite signaling devices for the feeder are an indispensable element of the equipment, with the help of which it is easiest to determine the interest of the fish in the bait and the very moment of hooking. Since in most cases bottom angling, to which and belongs, is considered an ambush hunting method that requires time for the fish to react to the bait served, the signaling device allows you to spend it on other secondary and preparatory fishing operations or to fish simultaneously with several gear without worrying about missed bites.

Currently, the fishing industry offers anglers ample opportunities in the choice of effective bite detection devices that have different principles of operation, unique design features and price levels. This variety of devices can be used as an interchangeable means of ensuring the accuracy of signal transmission, and can be used depending on the conditions of fishing. There are two types of signaling devices according to the type of perception: sound and visual. In turn, each of these types already has electronic analogues available in retail chains for purchase.

The fisherman needs to competently understand the capabilities of modern and time-tested classic signaling devices in order to choose the right option for fishing both in terms of efficiency and budget, which will help the article presented to his attention.

The visual indicator of a bite on the feeder provides control through the visual perception by the angler of the distinct movements of the device associated with the cord or tackle form. The group of visual signaling devices is considered the most extensive of the direction of this element of equipment. It includes quiver-tips, bite light controllers, called fireflies in the fishing community, swingers, side nods and floats. All these devices are versatile and easy to use, suitable for almost all types of feeder gear.

Factory products are notable for their low cost, and if desired, they are quite easy to make on their own from improvised materials at home, and some options are even right on the shore of a reservoir while fishing. This type is suitable for use during daylight hours, and with simple manipulations and modifications of structures, it can also provide night fishing. In continuation of the article, we will consider the main types of visual controllers, dwelling in more detail on their descriptions and principles of operation in the conditions of feeder fishing.

Firefly

Light signaling devices have a direct purpose for fishing organized at night. The operating principle of the firefly controllers is based on the chemical reactions of a pair of substances that, when mixed, fluoresce for 12–20 hours. The compositions are in sealed tubes in different compartments. The deformation of the tube by elementary compression destroys the septum, mixing the liquids and thus catalyzing the reaction that causes the glow. Complete with a capsule charged with solutions, the manufacturer offers a soft polymer tube designed to attach the device to the quiver type of the tackle.

The firefly is attached to the end of the rod, the movements of which are observed, reacting to the intensity of the twitching of the light point under the influence of the fish that has taken the nozzle. In addition to the mounting tube, you can use adhesive tape, adhesive tape or electrical tape to mount the firefly on rigging elements that can show a bite. Fireflies are an effective and inexpensive tool for a night-type visual signaling device.

Do-it-yourself bite signaling device for a feeder

Foil tubes, although primitive in nature, are quite effective in practical applications. This type of controller can be quickly assembled in the field from a minimum of materials in the shortest possible time. For the manufacture of the device, a piece of foil paper is required, which can be removed from the cigarette pack, subsequently twisted into a tube. Do-it-yourself prepared bite signaling device for the feeder is mounted on a slightly sagging tackle cord, which straightens out when biting, changing the initial position of the foil tube, in this way notifying about the bite.

In addition to visualization, the foil is able to create rustling sounds, and at night, when illuminated by a lantern, emit glare. The disadvantage of the controller is its low weight, which cannot cope with moderate wind loads, which introduces errors in determining the accuracy of bites.

Pendulum bite alarm

The pendulum controller consists of a wire rod with loops located at right angles to it from the opposite end of the sides. One of the sides of the device ends with a spherical tip weight, most of which have a hole for mounting a firefly.

The principle of operation of the pendulum is based on the suspension of the product on the thread, by means of winding through the slots in the wire loops on the cord of the tackle between the reel and the first winding ring. The tip in a calm state forms a slack in the thread, and the bite evens out the position of the rod, straightening the trajectory caused by the slack, which is clearly visible when observed. Fishing at night is carried out with an activated firefly inserted into the hole of the tip.

Float

In feeder fishing, floats are rarely used in equipment and, in general, this technique is suitable for fishing in stagnant waters in small water areas, closed ponds and quiet backwaters. Any wind loads and increasing the range of the distance reduce the effectiveness of the visual signal transmission. Various materials with positive buoyancy in bright colors are suitable for the float. It can be either a foam and plastic product, or a wooden or even a goose feather fixture.

Made in the desired shape and painted in a color that is clearly visible from a long distance, the signaling device is attached directly to the cord of the bottom gear. The place of attachment is determined by a preliminary measurement of the depth, setting the float so that it remains on the surface of the water with the feeder lying at the bottom. The controller is fixed by means of silicone stoppers or nipple rubber. The moment of bite is determined by the movement of the float or its complete absence.

Side bite alarm and quiver tip

Experienced anglers quite successfully use the kivertip of the gear itself as a bite indicator, determining the moments necessary for hooking by its deviation. But in some cases, caused by the inexperience of the angler, the low sensitivity of the rod tip, the so-called oakiness of the material, and the tenderness of the fish bites, the method of installing an additional lateral nod is used.

A homemade nod-type bite signaling device is easiest to make from springy wire or a thin strip of elastic steel. At the end of the nod, a hole is made to pull the main thread through it, attaching the main body of the device to the upper part of the rod, using adhesive tape or electrical tape familiar to every layman. Nods are highly sensitive to any tension of the cord, which increases the effectiveness of bottom fishing by timely hooking even carefully biting fish.

swinger

Swinger is a fairly effective and convenient indicator for feeder fishing that you can make yourself. The measure of adjusting the tension of the cord is made by shifting the center of gravity of the sliding load on the wire axis of the product. The fixation of the thread in the device is carried out by a special device, the working body of the swinger or a float, with a forest clamp. The free end of the lever is attached to the rod post. The fisherman, moving the load along the axis of the lever, adjust the sensitivity.

Homemade swinger can be assembled right on the shore of the reservoir. To do this, you need a cut neck from a plastic bottle, on which corks with holes prepared in advance at their centers are screwed onto the threads on both sides. This view will have a cargo chamber, which is filled with sand or earth. For the lever, you need a wire on which the load is strung. A wire of smaller diameter is suitable for the device of an adjustable mustache of a line holder. It remains to connect the free part of the lever with the first flyer, which holds the rod horizontally together with the second stand. The connection method should allow the lever to move freely vertically, for which you will need to articulate two elements by placing them on a common axis. Having adjusted the tension of the thread fixed by the mustache with a load, you can safely start fishing.

Audible alarms

The sound alarm for the feeder contributes to the perception of a bite by the ear of an angler who is at some distance from the tackle. Their application is universal and suitable for any time of the day. Often indicators of this kind are combined with fireflies, which helps to recognize the working gear among several tools in use at night. This category of devices includes mechanical and electronic versions of products. Mechanical controllers include bells and bells, while electronic controllers include devices for creating the sound of which, batteries and sound buzzers are needed. The advantage of devices is expressed in the ability to send a signal over long distances. The disadvantages of indicators are considered to be a decrease in the efficiency of their work in conditions of strong wind load, which causes frequent false bites.

Options for homemade sound devices

Elementary homemade sound bite controllers include any parts that emit when touching each other. You can quickly make a bite alarm from two hollow tubes, tying their ends together with a thread and throwing them over a cord. When the tension of the main line of the tackle changes, the tubes, touching each other, will make a peculiar sound, making it clear to the angler that the bite has begun. The same can be done from pieces of cut and bent tin with a cavity. The main thing is that the tone of the sound is expressed in sonority and is clearly different from the natural background noise.

Bell

A classic and cheap sound bite indicator is a miniature bell. The sound of such signaling devices is based on the touch of a freely moving pendulum or tongue of the inner walls of a hollow cone-shaped body. In practice, these are metal, loud-sounding products with fixtures for attaching the indicator to the quiver type of the tackle or to the main cord. Sounds are made when the product is rocked as a result of the transmission of vibrations through the cord, caused by the contact of the fish that took the hook with the nozzle. Sold in any fishing store and has a small price.

bells

Bells are a more progressive type of bell. Its design consists of a pair of three small hollow metal balls in which there are holes. Several small elements are embedded in the balls, which, through contact between themselves and the walls of the ball, make a peculiar sound. Balls with working elements inside are mounted on metal springs to the base of the device.

The base is made in the form of a mechanical spring clip. With this clamp, you can quickly and reliably install the signaling device on the feeder, on the very tip of the form, not far from the smallest winding ring. Most designs of bells designed for fishing purposes have mounting holes for a combination of a sound indicator with a firefly. To date, the use of bells in feeder fishing is more popular than all other types of bite identifiers and this is due to the democratic cost of products in conjunction with the efficiency of the signal.

Electronic options

In the last decade, the use of electronic signaling devices has been growing at a rapid pace in feeder fishing. Many well-known fishing brands have mastered the production of quality kits to provide bite alarms that are resistant to wet conditions, shock loads and sudden changes in temperature, as well as consuming negligible amounts of energy when activated.

The signaling device is endowed with light and sound abilities to identify bites, which differ in the intensity and brightness of the transmission of sound and light waves. In addition, many kits are formed in conjunction with transmitters or pagers to control signals over considerable distances, as well as electronic swingers. All equipment fits into a suitcase specialized for storing the set, mounted with minimal effort, and does not require specific conditions and extra space for transportation and storage.

The principle of operation of electronic bite indicators is based on laying the cord of the tackle in the impeller of the device, which, scrolling as a result of the tension of the cord, closes the contacts of the device. The process involves the conversion of mechanical energy into electrical energy, which is transmitted to the light diodes and the sound buzzer of the device, thus giving a signal. The equipment is powered by rechargeable batteries or disposable batteries.

Advantages and disadvantages of electronic devices

The advantages of electronic indicators are obvious. After all, this is a complete automation of the bite process with the transmission of a distinct signal over a distance and traces of the remaining memory after the completion of the signaling, which can be found out from the glow of an additional diode remaining for a couple of minutes. The fisherman does not need to constantly be at the tackle, continuously monitoring their condition, but he can safely engage in any other activity up to sleep and be sure that the electronic watchman will wake him up at the most crucial moment. And even after waking up, he will indicate, based on the tone of the sound and the color of the backlight, which tackle gives a chance for success. But the angler must understand that in addition to the comfort and advantages of fishing, electronic controllers will require additional costs for their maintenance, which consists in the constant availability of basic and spare nutrients and their regular replacement.

Important! To install bite alarms, you need additional equipment in the form of a rod-pod or a pair of rigid racks for laying tackle in them and mounting the device body.

All this entails additional expenditure of money. And the kits themselves are not cheap, they are dependent on moisture getting inside the case and do not withstand serious deformations during careless operation. There are many fakes on the markets that imitate a quality product, not always significantly inferior to it in price. Therefore, having decided to purchase, it is better to purchase an electronic set of indicators from well-known brands that give a guarantee on their product.

How to choose a fishing bite alarm

In our opinion, it is necessary to choose a signaling device for a feeder, based on the number of fishing trips and the duration of the fishing sessions themselves. A rare trip, once every couple of months, for one-day fishing with obviously good weather is unlikely to require the purchase of an expensive set of electronic equipment with a rod-pod for four tackle. Such fishing can be carried out quite successfully and effortlessly for the angler, using cheap bells as indicators, pleasing with perky sound during frequent bites.

Another thing is when the angler is seriously passionate about catching trophy carp, feeding the point for several days, and then spending days and nights in anticipation of the coveted bite for a whole week, or even more. In such a situation, electronic guards will help you endure all hardships and achieve the desired result of the catch. Therefore, the final choice for the type of signaling device directly depends on the needs and capabilities of the angler, and you learned about the extent of their effectiveness in feeder fishing from the material of the article.

This article will present the types of bite signaling devices, their brief description, advantages and disadvantages, as well as do-it-yourself manufacturing options.

The signaling device is an indispensable part of fishing tackle, the main purpose of which is to improve the quality of fish biting and its timely recognition.

Distinguish:

visual;
sound;
side;
electronic.

Visual annunciators

At the heart of the work is the observation of the course of biting. This type of tackle makes it more obvious, saves time and bait.

These include:

nod;
float;
foil tube;
Firefly.

Nod

A nod is an inexpensive device, attached to the tip of the feeder, it happens:

Lavsan, the same (polyethylene terephthalate) PET, plastic bottle material. A nod from lavsan is great for catching mormyshka, especially if with a bloodworm, in which case the game of mormyshka is better. The length of the nod should be 10-15 cm. Such a nod can be made at home by cutting it out from the same bottle and making a hole with a heated needle.
Metal The stainless steel nod is best at depths or currents, allowing you to perfectly distinguish between fish bites and current jerks, and can be bent to improve the look of bites. Its length is up to 18 cm. It consists of a metal plate 1.5-3 mm wide, the mount should be a cone for free adjustment of the plate travel, and at the end there is a plastic ring for the line to pass through. For the entire length of the nod, you need to put 1-2 cambric to hold the fishing line. You can do it at home with a hard rubber band for a cone, plate, cambric, and ring.
spring nod, an excellent bite indicator in the case of heavy baits, especially for predatory fish. It is used for such methods of fishing as baubles or spinners. You can make it at home using a twisted spring 15-18 cm long, 2-3.5 mm in diameter, a rubber or plastic mount and large beads with a hole for the line to pass through.
Balance nod, works thanks to the principle of action of a counterbalance. At the end of the nod, a moving weight is attached, which balances the mass of tackle. Equipped with a bearing. Perfect for winter fishing in a tent.

The upper nod - a bite signaling device is made of dense foam. On the bottom - made of polyethylene foam

Production order:

You will need a copper wire on which the sliding element will be located and rotated, and its upper part will prevent rotation around its axis of the nod.
To ensure that the glide is perfect and fits the size of the wire, you need to cut off a piece of the ear stick and fix it.
The very working part of the nod can be taken from old non-working metal nods.
Balance weight - lead or tin, moves along a nod, is fixed with cambric and is selected according to the weight of the equipment.

Float

Fishing tackle that does not require special financial costs. For its manufacture, it is necessary to take into account the depth of the reservoir, the casting distance, the speed of the current. The choice of material and the method of processing the float will depend on this.

When buying or making a float, consider the following:

A heavy float weighing 3-10 grams is designed to cast a fishing rod at least 50 m, it is designed for larger fish: pretty catfish or carp.
A float of average gravity weighing 0.8-2.5 grams will be needed on reservoirs with a current. This tackle is perfect for large carp or silver carp.
A light float weighing up to 0.8 grams is used for fishing near the shore. Very sensitive and works even on an inconspicuous bite. It is used for catching roach, rudd, sebel, crucian.

Consider options for making light floats at home, they will cost a penny, and you can make them in a matter of minutes.

For manufacturing you will need:

Styrofoam;
wine cork;
goose or duck feather;
cane.

Additional materials include: colored acrylic paints, waterproof glue, wire, toothpicks of different lengths.

Of the tools you will need: a drill, sandpaper, a sharp knife, a drill (diameter 2 mm).

Varieties:

foam float . A cylindrical piece 5 cm long and 2 cm thick is cut out of dense foam. Next, a long toothpick is inserted into this blank, and its other end is inserted into the drill chuck, which is tightly fixed in a vice. While the drill rotates the workpiece, it is necessary to grind it with sandpaper and give it the desired shape. Then the toothpick is removed and a new one is inserted, having previously “planted” it on the glue to a depth of 2/3 of the size of the float. Styrofoam is painted with bright paint, you can use nail polish. To attach the float to the fishing line, a carabiner-swivel is attached to its lower part. The scheme for making a float from a wine cork is identical, in addition, the cork does not need to be sanded, but simply coated with several layers of paint.
Duck or goose feather float. The feather is first cleaned of fluff with a sharp knife and held over a slow fire to remove excess fluff. Since the length of the pen can be different, the float will need no more than 15 cm. We paint it in a bright “poisonous” color, attach two rubber rings in the middle and at the bottom of the float and attach it to the fishing line.
Reed float it is done in the same way as from a pen, besides, you can make it right on a fishing trip, just taking nail polish with you.

foil tubes

Cheap and easy. It works thanks to the oscillation of the fishing line. Done in 5 minutes.

How to make at home:

Aluminum foil is taken as a material and rolled into a tube. It is put on the main fishing line. It is important to pass the line between the first ring on the feeder and the reel to form a slack in the line.

The first ring of the feeder should be thicker than the tube itself. When biting, the sag of the fishing line will decrease. The foil plays well in the sun and rustles, but due to its lightness in the wind it is useless.

Great tackle for night fishing. Due to the fluorescent glow, it is clearly visible in the dark. Used with spinning rods, fishing rods, and other gear.

How to do it yourself?Several options are worth considering:

We take white or yellow foil, cut into strips about 5 mm wide. We apply the finished strips with waterproof glue to the float antenna. To check in action, it is worth bringing a little light, you can take a flashlight.
Purchase Specialty Phosphorus Infused Paint, capable of glowing in the dark and applied to the float.
For manufacturing you need to take: clip stationery , clothespin, fishing firefly.

A firefly is attached to the clamp and put on the top of the feeder . It is recommended to put on before each cast, so as not to break the rods.

A big plus of all types of visual signaling devices is more than reasonable price and ease of use. Well, the downside is that, under difficult weather conditions (wind, rain, strong current), their effectiveness is almost zero.

Fireflies - thanks to the fluorescent glow, they are clearly visible in the dark

buzzer

The simplest are the bell or rattle. The bell is often used at long distances, on a spinning rod.

Principle of operation

A set of fasteners in which, for example, a bell is attached to the top of the feeder. If it starts to peck, the top of the feeder, on which the signaling device is fixed, begins to oscillate and our device produces a sound.

The advantages include low cost, sensitivity to the slightest bites, the ability to use over long distances.

Step by step instructions for making

Would need:

Flat spring about 20 cm long, can be taken from an old alarm clock, clock. It should be smooth, without errors.
Aluminum wire 20 cm long.
Plastic strip 20 cm long.
Dye.

On the sides of our spring we make holes with different diameters. We fasten the plastic strip on one side with a wire so that it is securely held at the access ring. On the other hand, we make a hook for which the spring is held.

Side signaling device

Or, as experts say, a lateral quiver-type. At the heart of the device, fastening to the form of the feeder and a springy part made of plastic or metal. It is placed between the coil and the first ring of the feeder.

How does it work

After casting, the fishing line is threaded into the hook, which is located at the opposite end from the feeder. The length of the running gear is about 10-15 cm. We put the side quiver-type to the feeder blank at an angle of 90 degrees. When the bite starts, the device will become almost parallel to the feeder.

Important benefits are:

works in all weather conditions;
suitable for use on the winding banks of reservoirs, where there are many cliffs and snags.

Since the bulk of quiver types are made of fiberglass, big minus is its excessive softness, that in the case of a strong current, its sensitivity is lost. Also, this material, even under small loads, can begin to exfoliate.

How to make a quivertip

To make a quiver type at home, you will need:

15-20 cm of metal springy wire;
metal tube with a diameter of 2 mm and a length of 5 cm.

At a distance of 15 cm from the coil, we fix the tube on the feeder form. Next, we make a Z-shaped hook at one end of the wire, bend the other at a right angle for fastening in the tube. We put the finished product on the feeder and throw it. We insert the fishing line into the hook of the quivertip. For better visibility, we attach a bright colored ball to the end of the hook.

Side bite alarm for feeder

Electronic signaling devices

This modern miracle of technology is equipped with light or sound devices, with the help of which the bite is instantly visible.

How does it work

It is installed on the shore of the reservoir and attached to the fishing rod.
The fishing line must be passed through a special roller, a hole on the signaling device, and connected to the slot of the reel.
When the bite starts, the built-in gear will move on the roller and the signal will work.

The advantages of electronic signaling devices include:

Hypersensitivity. You can clearly see the time and intensity of the bite.
Thanks to sound and light indicators, there is no need to be constantly near the fishing rod.
Works in all weather conditions.
Long distance is not a barrier.

Experienced fishermen call the only drawback of this device the inconvenience when fishing in "stagnant" water. If the fish does not go “to the shore” when biting, then you can simply not notice it.

How to do it yourself

To make it cheaper and sensibly, you need to take the most common keychain with sound as the basis. Key fob contacts, preferably in the form of two plates, remove to the outside.

We close the keychain button and attach it to the rod stand. We take a piece of plastic (strip) 2 mm thick and attach it to the fishing rod between the first ring and the reel and bring it out between the contacts. As soon as it starts to peck, the fishing line will pull out the plastic, a circuit will occur and music will play.

When buying an electronic signaling device, pay attention to what the components are made of. Do not chase the price, plastic signaling devices are inexpensive, but they will not last long either.
When transporting gear, do not forget to pack the signaling device in a special case. to avoid cracks and breakage.
To make the bell more sensitive, the spring to which it is attached must be stretched as much as possible.
Do not buy signaling devices with a metal keel. Such a float does not reflect bites well and determines the depth.
If in sunny weather the fish does not want to peck, then you need to make the signaling device darker and attract fish to the newly baited place.

On every fishing trip, it is important to always clearly determine the moment of bite. Many experienced anglers prefer to make their own bite alarm, although there are many industrial accessories for this.

Depending on the method of fishing, equipment, as well as weather conditions, certain devices may be used.

Types of existing signaling devices

The most famous and most used bite signaling device is regular float used in various equipment when fishing with a float rod. But in recent years, bite alarms for the feeder have become very popular. This is not surprising, given how popular this method of catching bottom fish is becoming.

There are several types of devices that help the angler not to miss the bite. This:

visual indicators;
sound alarms;
hybrid;
various electronic devices that can be attributed to both visual and sound.

The visual category includes: various nods, beacons, fireflies, pendulums, luminous tubes etc. These are simple devices, the main working parts of which are made as bright as possible to attract the attention of the fisherman.

Expert opinion

Knipovich Nikolai Mikhailovich

Interesting! For better preservation of luminous tubes, some manufacturers recommend storing them in the refrigerator.

Audible alarms include bells, bells, metal tubes etc. Sound devices compare favorably with the fact that the angler does not need to constantly watch them. A sound will alert him to a bite.

Electronic devices are mainly industrial products which can be purchased at retail outlets. The main disadvantage of electronic assistants is their high price and insufficient security from the influence of external factors (water, sun, dust).

The feeder signaling device can be attached to different parts of the equipment, for example:

1. At the very tip of the feeder rod. Despite the fact that the tips of such rods themselves are considered quite sensitive and informative, the signaling devices installed there are never superfluous, with their help, the definition of hooking becomes much more timely. Their main drawback is that before hooking or immediately after it, when playing fish, this device must be removed from the tip of the blank.

Directly at the butt of the rod, usually between the first and second access ring. Most often it is attached side bite alarm for feeder. The main element of such devices is various elastic plates or springs.
Another option is to attach the device to a rod stand. Most often, nods of various designs are attached in this way, which are complemented bells or bells.

Do-it-yourself bite alarms for a feeder, as a rule, take into account all the features of the gear for which they are adapted, besides, they are much simpler and more reliable, and therefore can be much more effective than industrial designs.

Model options

Nod

Perhaps this do-it-yourself feeder bite signaling device can be considered one of the simplest, but also one of the most sensitive. To make it you will need:

10 - 15 cm piece of any springy material of small section. It can be an elastic wire, a steel plate or a spring.
A polymer or durable rubber tube 3 to 5 cm long. It is useful for attaching a nod to the tip of the form.
Colored varnish.

At one end of the elastic element (nod body), with the help of round-nose pliers, you need to make a small loop (ring) for threading the main fishing line into it. After that, using a polymer or rubber tube, the nod is attached to the tip of the fishing rod. This fastening should be tight, but at the same time - not interfere with changing the length of the working part of the nod. This allows you to adjust its sensitivity. For greater visibility of the nod, you need to cover its body with a bright, waterproof varnish.

After fixing the nod, we thread the fishing line through its ring, equip it and start fishing. Since the material from which it is made is quite elastic, it is not required to disconnect it from the blank during hooking and subsequent fighting.

Such a homemade bite signaling device, after equipping the rod with it, can serve for a long time without repair and additional adjustment.

Firefly

Firefly, this is a signaling device for a feeder, designed to detect bites at night. As a rule, this is the name of polymer tubes, which, after their fracture, better in several places, due to a chemical reaction, begin to glow in the dark. They are usually supplemented with visual homemade bite signaling devices for the feeder. It is also possible to attach such a tube, 3 to 6 centimeters long, to the flexible tip of the feeder rod. This is done using a colorless adhesive tape or a polyethylene tube of a suitable diameter.

In addition to such luminous tubes, you can use various phosphorescent (glow in the dark) materials and paints, as well as miniature LEDs.

The principle of their operation is the same - fixing mechanical signaling devices (nods, pendulums, etc.) on the working elements.

In this simple way, you can do light indicator bites on the feeder, which will be noticeable at any time of the night from a distance up to 10 - 15 meters.

Side signaling device

Consider how you can make a side bite signaling device for a feeder. Its principle of operation is the same as that of the nod, but the difference is that it is fixed a little higher than the butt of the stick, in front of the first wire ring. To make such a bite signaling device on the feeder, you will need the following:

Elastic wire or thin metal plate about 200 mm long.
Thick rubber ring 30 - 50 mm wide, with an inner diameter identical to the diameter of the fishing rod at the point where the signaling device is attached. To do this, for example, you can look at a car shop of suitable sizes for a silent block from a car.
Colored tubes according to wire diameter.

Manufacturing process:

1. First, we prepare fasteners from a rubber ring. To do this, you must first cut it on one side so that you can put it on the form from the side.
2. After that, in the rubber fastener, in order to be able to fix it perpendicular to the form of the elastic wire, it is necessary to make a hole. The hole can be made with a hot-hot nail of a suitable diameter.

Expert opinion

Knipovich Nikolai Mikhailovich

Zoologist, hydrobiologist. I am a professional fisherman.

Attention! The hole can be made along the whip or perpendicular, depending on the size of the rubber ring. If the hole is made along the rod body, the end of the wire that will be inserted into it must be bent at an angle of 90 degrees.

At one end of the wire (metal plate), we make a hook with the help of round-nose pliers. A line will be inserted into it.
We fix the colored cambric near the hook. This will make the alarm more visible.
We insert the elastic element into the rubber housing of the fastener perpendicular to the fishing rod. The signaling device is ready to work.

After casting the tackle, insert the line into the ring and wait for a bite. When biting, when the line is pulled, the elastic element of the device will bend down to the rod body. When hooking and playing such feeder bite alarms no need to take off, they do not interfere with the actions of the angler at all.

It is quite possible to supplement such a hand-made signaling device for a feeder with a small firefly, this will allow it to be effectively used for fishing at night.

Sound notification

The most common and simple sound bite alarms are considered ordinary single or double bells, which are attached to the very tip of the form with a clothespin.

Also often used are a variety of bells that need to be attached to a fishing line, 10 - 15 centimeters from the tip of the stick. Under their weight, some sagging of the fishing line is created. When biting, the fishing line pulls the bell and a melodic sound is heard.

In order for the bell to hold securely on the fishing line, you will need a piece of dense, thick rubber. On the one hand, a bell is attached to it with the help of a ring, on the other hand, a cut is made in the rubber, approximately to its middle. When installing the bell, a fishing line is inserted into this slot, which, due to the friction force and elasticity of the rubber itself, is held quite securely.

It would also be useful to fasten the bell, with a cord or old fishing line, to the end of the form. This will help not to lose it after hooking. Such a do-it-yourself bite signaling device is, perhaps, every experienced angler. It is very sensitive, simple and effective. And only with a strong wind, with a buildup, it can give a lot of false signals.

Zoologist, hydrobiologist. Graduated from Leningrad State University named after Zhdanov, Faculty of Biology and Soil. I am a professional fisherman.

So, it's time to figure out what kind of signaling devices for the feeder are. Their types, application features, and how to make home-made bite alarms for the feeder at home.

All feeder signaling devices can be divided into three types: sound, visual and combined. But such a classification will be rather superficial, since according to the principle of robots and designs are the same, sound alarms can be very different.

Signaling devices for the feeder according to the principle of operation are:

pendulum;
Light (fireflies)
nods;
Sound (bells, bells, rattles);
Electronic

The most common pendulum feeder signaling device (pic 1) It is a tube that has a small loop at one end, attached to the first ring from the reel, and a barrel at the second end, a large loop comes out of it, which clings to the fishing line.

Pendulum signaling device

After casting, we tighten the fishing line just enough so that the bite signaling device sags a little. During the bite: pull (the fish pulls the tackle from the shore) - the signaling device rises, release (the fish pulls the tackle towards the shore) - falls. If this pendulum signaling device breaks down, you are not in a hurry to get upset, keep its barrel for yourself and then I will tell you how to make a homemade bite signaling device for the feeder out of it (swinger).

Some fishermen, with a weak bite, attach a sound signaling device to a pendulum one. The only condition of the buzzer should be light. Such signaling devices are preferable because they have a low price.

When buying a pendulum signaling device, you need to pay attention so that there are holes on the barrel of the signaling device, they are needed in order to insert an ampoule - a firefly during night fishing. This ampoule contains a chemical element, and when we break it, it will begin to glow, so that we can see the bite. They are usually sold two per pack. Enough of such an ampoule for one night, and they are inexpensive.

Previously, as a pendulum signaling device, we used a piece of clay or earth stuck to a fishing line, a twig, a clothespin.

DIY pendulum

We take a wire 30 cm long (the wire should bend easily and not break). We bend one edge of the wire, making a loop with a diameter of 1 cm, but so that after the loop you still have 1 cm of wire, we put a tube of juice 10-15 cm long on the wire. We put it in such a way that the float sits rigidly, but at the same time the tube does not stick out of it. Then, on the wire, we put on another piece of the tube, 2 cm long and bend the wire so as to make a loop 2-3 cm long, cut off the excess wire so that after the loop we have another 1 cm of wire. Then we bend the resulting loop at an angle of 90 degrees to the rest of the body of the signaling device.

Arriving at the reservoir, we will fix a small loop, for the first throughput ring from the coil, then we will hide a piece of wire 1 cm long in the body of the tube, fixing our signaling device. After we pass the fishing line through the large ring and again hide the free centimeter segment into the tube, finally fixing our home-made feeder signaling device. In order to remove it, we take out the short ends of the wire from the tubes.

A very quick option - we take a corrugated tube from the juice, close its holes with a cork made of foam, thread a barrel from a kinder surprise or an old float into it, then fasten paper clips in a plastic coating around the edges. Our alarm is ready.

Pendulum homemade bite signaling device for feeder video

Feeder signaling device (Swinger)

Unlike a conventional pendulum, such a feeder signal does not hang on the rod rings, reducing the casting distance and creating the possibility that the tackle will become tangled. And they don't sway much in the wind either.

The design of these signaling devices is as follows, one edge has a passage ring, through which the swinger is attached to the rod stand. The rack must be collapsible. The horn is removed, and at the bottom it has a tube into which we thread the edge of the swinger, then we insert the horn back into the rack. Well, this is ideally, there are a variety of racks and in some, a different mounting option is provided, the main thing is that your swinger is firmly fixed. Then, on the opposite edge, we have a clamp through which we pass the fishing line. The clamp has a nut, with the help of which we can regulate the force of the fishing line clamp. Also, most swingers are equipped with barrels where you can insert a firefly. Some swingers have a weight to adjust the weight of the signaling device, if you move the weight closer, then light pulls will be invisible, so we cut off false bites, if you move the weight close to the rack, then our tackle becomes more sensitive.

For convenience (so as not to stand and look at him all the time), a bell, a bell clings to the swinger, or it goes in conjunction with an electronic feeder signaling device.

DIY Swinger

It is very easy to make a homemade bite signaling device for a feeder (swinger), for this we need a barrel from the broken signaling device we have, you can also take a yellow barrel from a kinder surprise and make holes in it from above and below. Then, we take a piece of wire, bend it in half and insert it into the central hole of the barrel, so that on one side we have a small loop, and on the other, two protruding edges of the wire 1 cm long. We put two beads on them. We attach a piece of nylon thread to the loop.

homemade swinger

The principle of operation of such a feeder signaling device is simple. We rigidly fasten the free end of the kapron thread to the rod stand, fishing platform. Then, after we have thrown the tackle, we take our barrel and hook it onto the fishing line, passing it between two beads. When biting, we make hooking, the nylon thread is pulled and the feeder signaling device flies off the fishing line, so that we can safely reel out the tackle. Having carried out the recast, we again cling to the fishing line. You can attach a bell to the loop, and in addition to the visual one, our signaling device will also become a sound one, and if you also insert a firefly ampoule into the side hole, then it will be very difficult to miss a bite at night.

Light indicators of bites for the feeder

Feeder firefly signaling device. As mentioned earlier, there are two of them in the package, plus a cambric (tube) - for attaching this signaling device to the float. Many sound and pendulum signaling devices initially have holes for attaching such fireflies, but it is only necessary to select a firefly for the diameter of such signaling devices for the feeder. The diameter of the firefly can be seen on the package, but the diameter of the hole of other signaling devices is not always written on the case, and it is better to take them with you to the store and already there, with the support of the seller, choose the firefly that suits you.

In order to activate the light signaling device for the feeder, it must be broken. Inside the flask there is a liquid, and in the center, a tube with a chemical element, the tube breaks, the chemical element mixes with the liquid and starts to give light, for greater efficiency, the firefly must be shaken.

Firefly, fastening on the tip of the whip

If you are used to determining bites by the sensitive tip of the tip, then this firefly can be attached to it with the help of an adapter. True, there is one thing here, but the adapter cannot be attached to the edge of the tip, as it will hang out. Normally, it will be possible to fix it only closer to the middle. Of course, you will see bites, but this is less effective than if he was on the most sensitive part of the rod - the tip of the whip. It is in this position that you can see even the weakest pulls.

Inexpensive electronic firefly feeder signaling devices are also on sale. It is attached to the tip of the rod and in the working position it lights up green, when the fish attacks the bait, it starts flashing red. It is equipped with a detector that recognizes waves, wind and current. Battery operated.

Therefore, we take scissors, and cut off two rings 3-4 mm thick from the cambric. Then we pass these rings through the edge of the tip. It is necessary to put on the rings, on the tip ring, from below, the tube is elastic and stretches quite well, so that you will not tear the ring. Then the firefly feeder signaling device is rigidly fixed on the tip of the rod with the help of these rings.

Feeder signaling nod

A vivid example of this signaling device is the very sensitive tip of the feeder rod itself (whip, feeder tip, quiver tip, you can call it differently, the main thing is that its sensitivity is sufficient to transmit a bite signal). When we cast the tackle and put the rod on the stand, we wind the line so that the whip is a little tight, and now when the fish is pulled, it will bend even more, and straighten when released.

Homemade feeder bite signaling nod

But it is not always possible to use a rod with a sensitive tip, and in general, due to limited budgets, many anglers use a regular . In these cases, anglers often equip their blanks with homemade signaling devices, which are called "lateral nod". This nod is attached between the coil and the first ring. Fishing shops sell metal nods for winter rods with an elastic band that has three holes, one for attaching the elastic to the rod, the second for the nod and the third for the fishing line. With the help of electrical tape or adhesive tape (3-4 turns), we attach such an elastic band to the rod at a distance of 10-15 cm from the reel, so that when we insert the nod, it is perpendicular

side nod

rod, previously on an elastic band, in a place for attaching a nod, we cut the tape with a knife. At the opposite end of the nod, we have a ring, we cut a small hole in it so that after casting we can start a fishing line. The tackle is ready. For better fixation of the fishing line on the rod, you can make an additional hook on the nod itself. It is made from ordinary wire, one edge is bent in the shape of a hook, the second is threaded into the ring of a nod and bent. And with the help of pliers we firmly fix it. Then, take another piece of wire and fold it in half, then bend one edge. The resulting second hook is attached to the rod as on pic 2. When winding it to the rod, in order not to damage the blank, you must first wind two or three turns of electrical tape on it, and only then attach the hook to it.

Side nod fig. 2

Also, for the manufacture of such a feeder signaling device, you can use any other soft tube 4-5 cm long and 2-3 mm in diameter. Then we take our nod, a springy wire 15-20 cm long is suitable for the role of a nod, just do not take it too hard, otherwise the sensitivity will be weak. From one end, we bend the edge 3-4 cm at an angle of 90 degrees and fasten it into the tube. At the opposite end, we make a bend in the shape resembling the letter Z, each bend of such a hook is 1 cm long. After we have cast, we tighten the fishing line and put it into the Z-shaped hook of the signaling device. For better visualization, we need to paint our hook in a bright color.

Bite alarms for feeder bells (bells)

We have already talked a little about them earlier, these are devices of simple design, consisting of a clip-mount and a sound element (although bells can only have a through hole). They are attached to the edge of the rod.

Bell and bell

In order for the sound feeder signaling device to work, after casting, the tip of the rod must be stretched a little, and then when biting (pulling or releasing), the tip will begin to bend and the bell will give a signal that it is time to hook. Unfortunately, this method of fastening is far from perfect, since when biting, there is a chance that the bell will stop the line or fly off the rod during the fight. Therefore, it will be more effective to take an elastic band, attach one edge to the rod stand at a distance of 20 cm from its upper edge, the second edge directly or through a carabiner to the bell pass-through ring, on the other hand we attach the hook and hook it to the fishing line near the reel. If you are attaching a bell, or the bell does not have a separate access ring, but only a clip, then the leg of the hook or carabiner must be of the required length and thickness so that the clip can be fixed behind them. The length of the elastic must be selected so that the hooked hook pulls the fishing line a few centimeters. After hooking, make sure that the hook has flown off the line, and only then start reeling out the tackle.

Now the feeder signaling bell will not be lost during casting, as it will be installed after. If you are going to fish with several rods, then it is better to use several bells with different tones.

In order to give the bells maximum sensitivity, it is necessary to stretch the springs.

Do-it-yourself bell

You can make bells yourself, they are two balls, inside of which there is a bearing, when it hits the wall of the ball, a sound is made. So, we take two spiral wires, about 10 cm long, we attach them to our balls. Then we attach the free ends of the wire to a clothespin or crocodile. That's all. Although these homemade bite alarms for the feeder are very rare, since they are easier to buy at any fishing store for a small price.

Electronic signaling devices for feeder

These signaling devices can report a bite with a sound, light or light-sound signal. In carp fishing, signaling devices are used that notify of a bite on a pager. At the same time, it has several different receiving channels so that you can always recognize which feeder signaling device has worked.

The signaling device determines the bite by changing the tension of the fishing line between the contacts, and some models can separately notify about the pull and release, and this is a definite plus. There are also signaling devices that determine the bite by the vibration of the rod, such feeder signaling devices are considered more accurate, since they are minimally affected by wind and current.

electronic signaling device

They have a number of advantageous advantages over their mechanical counterparts:

Higher sensitivity
Less chance of triggering false bites.
The presence of an electronic board that recognizes the fluctuation of the fishing line caused by waves or wind. So we are no longer dependent on weather conditions.
If you are fishing with several rods at the same time, then such a device makes it possible to quickly determine on which blank the bite occurred.
These devices have only one drawback - their price, and most of these feeder signaling devices are designed for installation on a kind of hearth, which further increases their cost. Therefore, electronic signaling devices should be purchased by those who are sure that the feeder is their way of fishing. These signaling devices are effective when catching large fish (for example, carp), since you can throw tackle and go into the tent without fear of missing a bite, carp do not bite often. They are also suitable for those who like to relax in nature, when you can put fishing rods and do barbecue or other things.

When buying electronic signaling devices, you need to pay attention to the following points:

Among anglers, the most popular are relatively inexpensive, but reliable bite signaling devices for the feeder, such as:

"Barracuda" T5, waterproof due to the rubberized body, has a light and sound alarm, it is possible to adjust the sound power, tone, and it also has the ability to adjust the bite sensitivity. Powered by Krona battery.
"Kosadaka" T4 as well as "Barracuda" T5, battery operated "Krona", waterproof, very energy-efficient, you can adjust the volume and tone of the sound. When biting, it also gives a light signal. Manufacturer Japan.

Megatex Jay 3 a small device that is mounted on the rod so that it is convenient to turn it on after a recast. The bottom line is, bite, the signaling device determines by the vibration of the blank, and when the fish attacked the bait, it starts to give a signal so as not to drain the battery and not annoy the neighbors, during hooking, the signaling device turns off, when we re-cast the tackle, we press the button again. It consumes very little energy, due to which, according to the manufacturer, it is able to work for about 5 years without requiring battery replacement. It has a relatively low price, which is why it is also popular with anglers. Many fishermen complain about a rather high percentage of defects, so when buying, check its serviceability in the store. It is also undesirable to use it in the rain, although it is considered waterproof. Manufacturer Russia

Popular expensive, but more functional feeder signaling devices that allow you to receive information on a pager:

EOSC-9004- the set consists of 4 signaling devices, a walkie-talkie, a case for transportation. Adjustable volume, tone, sensitivity, has a customizable light signaling device. The bite signal is transmitted over a distance of 200 m. The manufacturer is China, but this did not affect the strength and reliability of this signaling device. You can connect a swinger to this signaling device. He also has a memory of the last bite.
Delkim also consists of 4 alarm sensors and a pager. This signaling device has a memory that allows, even after a long time, to obtain information on which particular fishing rod the bite occurred and its intensity. The pager has a vibration signal, so you can avoid unnecessary noise. The functionality of this signaling device is very high, as well as the price itself. Transmission distance 200 m. Made in Great Britain

Homemade electronic bite alarm for feeder

You can make a home-made electronic bite signaling device for the feeder, and for this we ourselves need a regular squeaker keychain. So, we hook a thin, 1-2 mm thick strip of plastic onto the fishing line. Then we attach the keychain to the rod stand. After we insert the plate into the gap between the contacts of the key fob. When biting, the fish will pull the line and the plastic will fly out of the contacts, they will close, and a signal will sound. Unfortunately, such an alarm will not work on the release, so it must be combined with a swinger.

So, now you know what kind of feeder signaling devices are, and which home-made, mechanical or electronic one to choose depends on your budget and fishing preferences.

Since ancient times, people have used various methods to effectively monitor the bite of fish. These were all kinds of floats, gatehouses or visual observation of the tip of the fishing rod. With time and experience came the desire and ability to improve these devices. And with the advent of new technologies, more “smart” bite alarms began to appear. Now there are various types of nods, bells, light, mechanical and electrical bite indicators.

Electronic signaling devices

In the distant 60s, the development of electronic signaling devices began. They combined visual and audible alarms. One of the more popular bite alarms was the Heron. The main disadvantage of this device was the need to connect it to an external battery.

Development did not stand still. Contacts with wires were replaced by small sensor blocks built into the body of the signaling device. They are much more reliable and more sensitive than older models.

Modern electrical signaling devices can receive a bite signal through:

Form

Such devices are attached directly to any convenient place on the rod, using adhesive tape. It can be used for both summer and winter fishing. The indicator housing is made in the form of a small cylinder, weighing about 12 grams. It is sealed and does not sink. The cylinder has an on-off button and sensitivity level settings for:

Predatory or large white fish;
Small white fish;
Winter fishing.

There are also auto (on-off) functions of the device when hooking. To save energy, there is an option to turn off the device if there are no bites for a long time (more than three hours)

The principle of operation of such devices is to remove information from the rod blank by a sensor built into the body. False signals from the wind, disturbances of the reservoir are not recorded. The bite signal is given by sound (up to 50 m) and LED (up to 100 m).

Lescu

These are electrical signaling devices of a traditional form. They are produced with fasteners for installation on a rod blank, or mounted on a rod pod, a rod stand. They consist of:

Corps;
signaling roller;
Batteries (crowns);
Microcircuits;
Sound, light signaling device.

The body is made of plastic or metal. It has a special place where the power supply is installed. In the upper part there is a roller with a photocell for fishing line. Inside the case there is a microcircuit, LEDs and a sound signal speaker. On the surface there are buttons for on-off, volume, sound tone selection, as well as a light signaling button.

The case has a threaded mount for screwing onto a stand or rod pod. The signaling device itself is also a stand for the rod. More expensive models have waterproof cases. For budget models, you can advise - to fill the board with candle wax on your own. This will prevent moisture from getting on the chip.

One of the most popular mechanical signaling devices is Megatex (picture below.)

Operating principle such signaling devices is simple:

The body is screwed onto the stand. It is brought to the working position (power is connected, turned on). The desired sound tone and volume are adjusted (this is convenient when fishing with several rods).
Tackle is thrown, a fishing rod is installed on the signaling device. The line starts up on the roller.
Slack is selected (swingers or mechanical bite alarms are needed to tension the fishing line), the friction on the reel is correctly set.

When biting, the fishing line through the roller sends a signal to the photocell. In turn, it generates a signal with sound and light. This informs the fisherman about the beginning of the bite.

As a rule, electrical signaling devices have 2 indicators. Red shows bite. Green or blue lights up when the device is turned on. It also burns for a few more seconds after the end of the bite. This makes it possible to see on which of the fishing rods the fish were biting.

Rating of top 3 models of electronic signaling devices

« Jay", inexpensive, practical option. Extremely popular model recently “Jay 3”. It ranks at the top of our rankings.

Attaches to the rod or whip of a winter fishing rod with adhesive tape. It has:

Protection against false signals (waves, wind, algae);
Removable CR1220 battery;
Metal waterproof, non-sinking case;
Energy saving shutdown function;
When operating from -40 to +100ºС, the shelf life is up to one year.

Instruction:

Press the button, a beep will sound. When the button is released, a short beep - the device is on, a long one - off.
2nd, 3rd, 4th, 5th, 6th clicks - sets the sensitivity levels.
7th, 8th, 9th clicks - setting melodies for a bite.
10th press - setting the on / off auto mode when hooking.
By pressing and holding the button (20 seconds), the tone and volume of the sound are set.

Cheap alarm "Barracuda" (barracuda), made of black rubberized plastic.

Waterproof body;
Volume and tone adjustment;
Light and sound alarm;
A krone battery (9 V) is used for power.

The control buttons are located on the front side of the signaling device. The rubberized case allows to use the device in any weather conditions. The board is covered with a waterproof coating.

Electronic Chinese signaling device "Hoxwell" It has:

Light, sound indicator of inclusion;
Eight tone levels;
Volume control, mute mode;
Settings memory function;
LED bite direction scale;
Built-in signal transmitter;
Enable night mode.

These are models protected from moisture ingress, with a lateral arrangement of control buttons. The case is additionally protected by rubber pads along the seams of the joints. A battery is used for power. These models are also equipped with pagers.

Electronic signaling devices with pagers

Modern professional signaling devices are equipped with built-in signal transmitters. This is convenient for day or night fishing, being at a relatively large distance from the rods. The bite signal is transmitted to the pager. The signal transmission distance reaches 200 m. The pager can notify the fisherman with a vibro, sound or light signal. Each set of signaling devices has its own pager. It can simultaneously receive signals from 4 devices.

Advantages of using models with a built-in signal transmitter:

Obtaining information about the tension of the fishing line, at a distance from the place of fishing.
On which of the rods did the bite occur?

The pager is configured together with signaling devices, which allows you to select and control the signal. It is necessary to remember about the timely charging of the device, so as not to be left without communication with signaling devices during fishing.

Ready-made sets of signaling devices

Such sets are equipped with a pager, usually 4 signaling devices, batteries and chargers (if necessary). The set is packed in a plastic case. The signaling devices are equipped with built-in transmitters for communication with the pager.

They also have special connectors for connecting electronic swingers. They have waterproof cases. These kits are easy to transport, easy to assemble and use. Ready-made sets of signaling devices have a rather high cost. However, they differ in the quality of the models and in practice, the absence of fakes.

Light signaling devices (firefly)

For night fishing, one of the most common types of signaling devices are fireflies. They are easy to use, affordable and suitable for all types of fishing (bottom, float or spinning).

Basically, signaling devices manufactured by the manufacturer have the following forms:

In the form of a nail or stick;
In the form of a light bulb, which increases the area of illumination.

According to the principle of operation, such devices are divided into three types:

Collapsible capsules with small batteries and LED. Such fireflies are reusable, thanks to the replacement of batteries.
Light-accumulative signaling devices. The principle of their operation is the accumulation of light during their short-term illumination. For their work, you need to have a good flashlight.
Disposable chemical fireflies. They consist of a plastic flask with component A. Inside of which there is a capsule with reagent B. Under mechanical action, components A and B are mixed, and a reaction occurs - luminescence.

Light signaling devices can be of different colors. For chemical species, the most popular is the yellow-green glow. It's a pretty bright color. He is calm enough not to irritate the eyes. There are also light and sound bite alarms. They will be discussed below.

Fireflies are attached:

On the float, inserting into their silicone antennas. Or with the help of elastic bands - on their tops.
To the tip of the rod, using silicone rubber bands. Special plastic fasteners are also sold. Several fireflies can be installed in such mounts.

The main brands that you can buy in a fishing store: Ocean Sun, Kostal, Balzer, Salmo, Rodinson, Liman Fish, Strike Alert.

Do-it-yourself light signaling device

As mentioned above, light signaling devices have proven themselves well for night fishing. In order not to buy them in the store, you can easily make such an indicator at home. For manufacturing you will need:

Straws for a cocktail;
Crocodile clips;
Glue gun;
LEDs;
Round flat batteries 3 V;
Heat shrink, according to the size of the battery.

A piece of straw, 3–4 cm long, is filled with a glue gun. An LED is inserted inside. Its legs protrude by 0.5 cm. A battery is inserted into the heat shrink tube, 2 cm long. A piece of straw with a fixed hairpin is inserted into one end of the heat shrink. Fits tightly with a lighter. A straw with an LED is inserted into the other end. The legs of the LED are located on different sides of the battery (+, -). Sets down so that it can be pulled out.

Such a homemade device is enough for the entire fishing season. Manufacturing does not take much time, does not require soldering and high costs.

Audible alarms

Bells on a clothespin;
Rattles;
Bells.

Such indicators are used on bottom gear at night. Sound signaling devices are also installed during daylight hours, when it is difficult to visually monitor a large number of gear. They are usually mounted on a fishing line or donkey rod tip. (Pictures enlarge.)

Very often, the factory fasteners of the bell are difficult to reset during cutting from the fishing line. This interferes with the normal reeling of tackle when fighting. Therefore, you can modify the signaling device holder yourself. For this you will need:

Thin-walled rubber hose, approximately 3 cm in diameter.
A small bolt with a nut that will fit into the ear of the bell

A ring is cut off from the hose, 1.5 cm wide. An incision is made on the ring and a hook is shaped. A hole must be made in its long part. Through it, the bell is attached to the elastic with a bolt.

You can make your own bell. For example, from decorations, on the backs of old iron beds. They look like a cylinder with conical tops.

For manufacturing you will need:

Saw the cylinder in half;
Make a hole in the upper part;
Attach a nut to the self-tapping screw, tying it on a fishing line. This will be the tongue of the bell;
Self-tapping screw, screwed into the hole from the inside of the bell;
A wine cork is put on the tip. An incision is made in the cork for attaching the indicator to the fishing line of the rod.

You can make a bell out of an old phone call. We disassemble the call, we get two cups. In the upper part, through the hole, the tongue is fixed. For it, you can use the nut on the fishing line. To install the signaling device on the fishing line, you can use a cork.

Do-it-yourself bells differ from factory fixtures in their special sound. This allows you not to confuse their sound on a fishing trip with their neighbors.

Mechanical signaling device

Mechanical signaling devices play the role of visual control over the bite. One of the simplest can be a piece of clay or dough, suspended on a fishing line or an ordinary part of a branch found on the shore.

Purchased mechanical signaling devices can be divided into three types:

"Monkey". This is a fairly simple design of a rod and a tube (cylinder). The tube is put on the fishing line between the reel and the first ring. The rod is stuck into the ground at an angle or vertically. A signaling device is hung on it. When biting, he moves freely along the line. Such a signaling device can be made with your own hands, using foil instead of a tube.
Bad (hanger)- This is a load fixed on a chain or flexible cable with a clip for fishing line. At the other end is a stand mount. This is a fairly sensitive type of alarm. Works well in calm weather. Hangers are much lighter than classic swingers.
swinger- is one of the most popular (especially among carp anglers) mechanical types of signaling devices. The principle of their work is to raise, lower the device on the fishing line. There are several options for sale:
Classical is a swinger, consisting of a weight of 100 grams, which moves freely along a metal lever. One end of the lever is equipped with a hinge for attaching to the stand. At the other end is a plastic head with a special clip for fishing line.

It is installed as follows: after casting, the rod is placed on a stand; excess fishing line is reeled; the fishing line is wound into the mount on the head; the desired sag is regulated by the movement of the load along the lever; when hooking, the line comes out freely from the clamp on the head.

Classic swingers are mainly used in combination with electronic signaling devices.

A lightweight swinger consists of a plastic tube with a wire rod inside. At the front end is a bright head with a fishing line attachment. At the other end there is a loop for installing a signaling device on the rod throughput ring. It works in the same way as the classic swinger. Only constantly is on the form. The price of this model is much lower.

Another of the mechanical signaling devices is a nod. It's very easy to make it yourself. To do this, in any fishing store you can buy a spring nod for a winter fishing rod. This spring has a whip attachment and a bright ball on the end. To put a nod on the bottom gear you need:

Cut the rubber mount near the hole through which it is put on the whip
Put it on the tip of the rod near the first ring
To secure, a thread is wrapped around the fastening circle and tied. Top with insulation
The fishing line is passed through a ring, a spring with a ball

The gear is ready to go. The sensitivity of the nod is adjusted by the movement of the spring. This design allows you to see even the lightest bites. It is good to use for gear with a hard blank tip.

Side bite alarm for feeder

At its core, the feeder itself is a rather sensitive tackle. However, sometimes this is not enough with strong winds and large breaking waves. Also, on reservoirs where it is not possible to put the feeder parallel to the shore, the visibility of bites decreases. For such conditions, a side signaling device or a side jib tip will be indispensable.

Finding a ready-made design in stores is quite problematic. Here are some tips on how to make such a device yourself:

Details for the signaling device: attachment to the rod; metal rod; steel wire.

Fasteners can be made from a conventional plastic clamp for PVC pipes. A rubber ring will help to fix it on the rod.
The tube or rod is selected according to the diameter of the hole in the clamp.
Steel wire with a diameter of about 1 mm and a length of up to 20 cm is bent in an arc. One end is bent at an angle of 90º. The length of the bend is approximately 5 cm. It is attached to the rod with glue and threads. At the second end, a hook is made for fishing line. To better see the bites, colored cambrics are put on the wire.
The whole structure is attached in front of the first winding ring closer to the coil.

Take the usual shop nod for a winter fishing rod, insulating tape. Installation method:

There is an elastic band on the nod for putting it on a fishing rod. With the help of electrical tape, it is mounted on the form next to the coil.
A cut is made on the nod ring, into which the fishing line will be wound.
A nod is installed in the groove on the elastic band, a fishing line is started. The signaling device is ready for operation.

These simple and sensitive adaptations respond well to even sluggish bites from inactive fish.

Bite alarm for ice fishing for girders

Zherlitsy are designed for catching predatory fish on live bait. Gutter devices:

Base;
Reel with fishing line;
Rack with a signaling device.

For a bite signaling device, a flag is most often used. This is a piece of bright matter (usually red) on a narrow, thin plate 40 - 60 cm long. Sometimes springs are placed. The operation of this indicator is very simple. When setting up, the flag, in a bent position, is fixed on the coil. The predator, taking the bait, pulls the line. Scrolling, the coil releases the flag. It straightens up, which allows you to see the bite.

A little advice. To distinguish your flags from other people's gear, it is better to make the signaling device of the original shape and color.

From all of the above, we can conclude that regardless of the conditions and methods of fishing, signaling devices play an important role in successful fishing. The angler himself can choose which model suits him. Buy signaling devices in the store or make them yourself, with your own hands, how to improve your gear.