Homemade chairs for fishing. How to make a folding chair with your own hands? Industrial options for feeder fishing chairs

Each angler has a chair on which he sits near the pond and catches fish, and also admires nature when there is no bite. You can do without a chair, but it will not be the same fishing. Fishing is, first of all, recreation, as a result of which a person accumulates energy for the future. If you fish on a chair, you can easily endure the whole day. If fishing is carried out all day on your feet, then a person quickly gets tired. Of course, if you take spinning players, then they do not need a chair, since they move around a lot throughout the entire period of fishing, in search of predatory fish. For lovers of classic fishing, using a conventional fishing rod or feeder, a chair is a must.

You can buy it at the store or make it yourself, especially since it is not at all difficult. This is exactly what this article is about.

There are many options for making a fishing chair with your own hands. As a rule, most anglers opt for a simple model that has a minimum weight and takes up a minimum of free space. Many believe that a chair is necessary in order to facilitate the process of fishing, making it more comfortable. A higher level of comfort requires a more serious design, which is unlikely to be light and will take up a lot of volume. In some cases, this does not matter if there is something to transport fishing accessories and other accessories.

The following designs may be most useful for fishing:

Many anglers take these designs with them if fishing is planned for a long period. Everyone knows that fish biting is not regular and it takes breaks, especially during the day. When there is no bite, then you can lie down, only occasionally looking at the bite indicator. If you install an electronic indicator, then you never miss the moment of bite. Naturally, a chair-lounger is not a simple design, not light, and takes up a lot of space during transportation.

This is a pretty useful thing because it allows you to relax your back, which is important, especially for older anglers. Chair-chair can be used in other cases. Such models are taken with them when they go fishing for a few days, for example, for the weekend.

This design has a number of advantages compared to other models, since you can not only sit on it, but also store fishing accessories in it, as well as caught fish. The box chair is not in great demand among summer fishing enthusiasts, but winter fishing enthusiasts appreciate the merits of such a model. Most ice fishing enthusiasts have such a box chair in their arsenal, as it is an indispensable thing.

Naturally, such a chair does not have the necessary level of comfort, but it has a number of advantages. Firstly, it is lightweight, as it is made from lightweight materials. Secondly, it takes up little space, and it can even be transported by bicycle, which cannot be said about other designs. There are claims that sitting on such a chair is as comfortable as sitting on the ground or on a stump. Firstly, it is unlikely that you will be able to find a stump of the right height in a fishing place, and secondly, sitting on the ground near a reservoir may not pass without a trace, especially since you have to sit for a long time. In addition, such a folding chair is not difficult to make yourself. Moreover, it will take a little money and time.

The quality and design of the fishing chair

The quality of a fishing chair depends on many factors, including its design. In the manufacture of such accessories, lightweight materials are used that are not very durable. Other materials, while strong, carry considerable weight. In addition, for the manufacture will require a special tool.

As a rule, the device of a fishing chair comes down to the fact that the structure is transformed from a working position to a transport one. This approach reduces the usable space occupied by the product. Since it contains moving elements, the reliability of the structure is significantly reduced. Therefore, the design should be simple and have a minimum of moving joints.

Before you start making a fishing chair, you should calculate everything well, and most importantly, decide on its device. In addition, it is necessary to have basic skills in working with various materials and tools.

Folding chair, as a rule, consists of 2 planes connected by means of hinges, as well as a device that regulates the angle of the backrest. Basically, the seat and back are made in the form of a frame, made of light metal, on which the fabric is stretched, according to the principle of a well-known clamshell. By the way, if you try, you can make a chair for fishing from an old folding bed with a minimum of costs.
. The simplest design consists of a cabinet of a certain height (about 40 cm), on top of which a soft seat is mounted. It also serves as the top cover of the cabinet and has the ability to open. Fishing accessories and fish are stored inside the pedestal.

Chair with backrest and armrests. It can be made both folding and solid, but a minibus is required to transport it, since it will not fit in a regular car. The one-piece version is highly reliable, but you will have to pay for it with useful space. The most suitable option is a folding chair. To make such a chair will have to work hard. For the manufacture of such a design, light materials should also be used, but with acceptable strength.
. The most complex design, the manufacture of which will require a lot of personal time and money. In this case, you will also have to give preference to the folding option. In any case, this is the most suitable option. Its principle of operation is similar to a folding chair. It can also be made from 2 folding parts. The only difference is that the parts are made, for example, from plywood and upholstered with soft material. Therefore, this design may take up more space, but it is somewhat more reliable.

The main materials for the manufacture of a fishing chair are wood, plywood and chipboard. The use of metal is limited by the availability of special tools. First, you will need a welding machine, which not everyone can handle. Many argue that aluminum is not suitable, as it is too soft. This statement is erroneous. Many still remember the Soviet folding bed, on which many rested at home or in the country. Its frame is made of aluminum. Despite this, the clamshell served for years. Therefore, who has the opportunity to use an aluminum or duralumin pipe with a diameter of about 2 centimeters, then it can be safely used. At the same time, a light and mobile design will be obtained, moreover, it is resistant to atmospheric conditions. As for other materials, they will have to be protected from moisture.

You will also need durable fabric or artificial leather for upholstery. For moving joints, you will have to stock up on bolts, washers and nuts, and possibly other parts. It all depends on personal preferences, as well as the nature of the design.

It's time to move from the description to the practice of making the 3 types of chairs described above.

General approaches

All types of chairs, regardless of design, are made up of similar components. Therefore, some manufacturing steps will have similarities.

First of all, what needs to be done is to decide on the design of the future chair and create its drawing, according to the drawn sketch. At the same time, in the drawing, you need to indicate its main dimensions, as well as the dimensions of the components, separately.

All the main parts must be listed and a list is compiled based on them. For example:

Legs-2 pcs.
Back with legs.
High chair.
4 bolts, etc.

If you look at the drawing, you can determine the full availability of all the materials that are necessary for the manufacture of the structure.

All went to school and perfectly remember the lessons of descriptive geometry. Therefore, there should not be any particular problems in drawing such a simple drawing. If something does not work out, you can not draw a real drawing, but limit yourself to the usual drawings of parts by hand, indicating their real dimensions.

A drawing or drawing involves drawing a product from three sides - front, side and top. Side and top views are called projections. The main image is considered the front view, and the side view is located to the right of the main figure, and the top view is located below this figure. At the same time, the side view and the top view should not go beyond the dimensions of the front view. This can be considered a perfectly executed drawing.

At the same time, it should be noted that the time of graph paper and whatman paper is gone. Nowadays, they have been replaced by computers with special programs installed on them to automate the design process, including the stage of creating working drawings. Unfortunately, to learn how to create drawings on a computer, experience is required. Therefore, you should not bother with such a simple design, since you can get by with a simple freehand drawing.

Calculations

In order not to get confused in the drawings, it is necessary to indicate the actual dimensions of all parts.

After all dimensions are determined and all materials are prepared, you can proceed to the main stage - this is the implementation of the idea in practice. To do this, you need to go to the workshop, which can serve as a balcony, barn or garage, where all tools and materials are stored.

To make it, you need to take a pair of wooden bars and drill one hole in each of them in the center. After that, the bars are connected with the letter "X" using bolts.

The same is done with the other pair of bars. Finally, two "X"s are connected together, after which the chair is upholstered in artificial leather. To make it last for a long time, it should be covered with two layers of water-repellent varnish. Everything, the chair is ready for use. But this will not turn out to be a folding chair, which will not take up very much usable space. Folding chairs are made according to the same scheme, but for this it is better to use metal.

There are chairs of this type. Unfortunately, they are used very rarely, since such a design is not very stable.

Making such a chair can take much more useful time, and more effort will be required.

Manufacturing technology:

First of all, the back with legs is assembled, and then the second pair of legs along with the seat. Before assembly, it is necessary to check the conformity of all dimensions, after which you can start drilling holes for the connections. The legs are connected in the same way as in the first case, with the letter "X". bolts are used for connection. The holes for the bolts should be drilled a little larger in diameter so that they enter freely. The seat connects to the front. The seat is attached to the back not rigidly, but on hinges to make a folding structure. If desired, armrests can be attached to the seat. At the same time, it must be borne in mind that the folding design and the armrests can interfere.

As mentioned above, the drawer chair consists of a cabinet with an opening top that serves as a seat. This design is made of lightweight materials such as plywood or aluminum. The upper part of the cabinet is sheathed with artificial leather using foam rubber. The foam rubber is laid first, and then it is covered with artificial upholstery. It not only makes the chair soft, but also makes the seat warm. This is especially true in winter.

The manufacture of such a design will require real engineering knowledge, since the product is distinguished by the presence of a large number of connections, including moving elements.

The chair turns into a lounger (bed) due to a special mechanism. To implement such an idea, it is necessary to shift the centers of the holes in the scissors closer to the edge, after which special grooves are cut. Then a special frame is made and bolted to the back. After that, proceed to the manufacture of the seat. It can be made both solid wood and fabric.

Many anglers practice making various accessories with their own hands. Firstly, it is interesting, and secondly, this approach allows you to save significant funds. If you buy a chair for a fisherman, even the simplest one, you will have to part with a certain amount of money, and a lot of it.

But if there are extra funds, and there is no desire or skills to make at least an elementary product with your own hands, then you can go to a fishing store and purchase any chair you like. As a rule, the store always has a wide range of similar products that can satisfy the consumer of any category. Here you can buy both a simple folding chair and an armchair with armrests: if only there was money.

Every fisherman knows perfectly well how important it is to feel comfort and harmony in the process of your favorite pastime. That is why the quality arrangement of a fishing place.

Many lovers of bait fishing are sensitive to the issue of organizing space in their "catch" place, so the choice of a chair for fishing is a very important issue.

Since fishermen spend most of their time sitting, it is important that the chair is:

Made of good material;
Physiologically and anatomically correct form;
Reliably fixed on the ground;
It was comfortable for the back and spine;
It was made of materials suitable for the design of the fisherman's seat;
It had a strong and wear-resistant base.

Therefore, if you want to carry out the construction of a fishing chair with your own hands, you must carefully prepare for this issue and choose only the best materials.

Do-it-yourself fishing chairs are not very difficult to make, you just need to think first:

From what materials will the arrangement of this fishing accessory be carried out;
The house has everything you need or you need to purchase the missing items;
chair design;
Find a drawing suitable for the product;
Think about the color schemes of the product for the seat of the fisherman;
Allocate time so that everything is ready for a quality and safe pastime before the next exit to “hunt” for fish.

The quality and design of the fishing chair

Of course, the quality of the product directly depends on what materials are chosen to create a hand-made fishing chair. It is best to give preference to good and durable elements for arranging the seat.

The quality of the chair depends on:

How strong is the design chosen to create the frame, the basis for the product;
What fasteners are chosen to connect the parts of the chair;
What material for finishing is chosen;
Is the design of the chair correctly selected;
Is the seat carefully thought out based on the weight category of the fisherman.

Requirements for fishing chairs

In order for a fishing chair to become a real lifesaver for a fisherman who spends hours on the shore of a pond, the following factors must be considered when considering the design of this accessory:

Strength. Due to the fact that the fishing place is sometimes winding and uneven, and the weight of the fisherman can be very different, the strength of the structure is the key to safety. Naturally, the greater the weight of the lover to regale his own catch, the harder and more reliable should be the elements from which the chair will be assembled in the future. Fasteners must also be of high quality, because they determine how long a seat created by oneself will last.
Sustainability. The design of the chair must be thought out in such a way that it is securely installed even on uneven and mountainous surfaces. If the chair is unstable, then it will be used for its intended purpose for a very short time and after several fishing trips it will simply break, nullifying all the efforts of the fisherman. To avoid this, it is better to include elements such as springs, stretchable fasteners, fabric membranes made of durable and elastic material in the overall design.
Light weight of the product. When sorting through home elements, from which a fishing chair will be built in the future, you should try to opt for lighter details. Of course, the lightness of the design should not be at the expense of strength, but when carrying the product to the place of productive fishing, it is better that it does not weigh much. It is more comfortable and safe for the spine, given that in addition to the chair, the fisherman will also carry a fishing rod or spinning reel, tackle and bait, and on the way back, also a catch in addition.
Comfortable sizes. In order for the chair to fit easily into a fishing backpack, you need to take care of its comfortable dimensional indicators. This is quite simple to achieve, you need to correctly draw up a diagram, taking into account the dimensions of the fisherman and try to implement as much as possible, a small chair.
Affordable design. Of course, with high experience and skills, it is possible to build an abstruse and complex chair structure. But it will be more reliable and faster to give preference to the most lightweight design, taking into account the elements available for this.

The device of a fishing chair can be:

Whole. This is practical in terms of product reliability. But it is inconvenient when carrying, transporting. However, if this is a chair for fishing, for example, in the country, and the pond is located a stone's throw from the site, then you can easily rely on the one-piece design of the fishing chair.
Folding. This option is used more often. It is easy to make it yourself and easy to carry. Due to its compactness when folded, the folding chair can even fit in a backpack.

Designs of homemade fishing chairs

The design of a fishing chair for home-made manufacturing of a product, each fisherman can come up with on his own.

The main options are:

Folding chairs on three legs. For their manufacture, you will need aluminum or substitutes for this material, supports, a fabric that is selected for covering, fasteners for connecting individual parts. Such a chair does not imply the presence of a back, which is not always convenient. But thanks to the correct equipment of the legs, it can be securely installed on a flat surface. If fishing usually takes place in winding, mountainous and uneven areas, then it is better to choose a different chair for building with your own hands.
Folding chairs on two intersecting legs. Such a chair is also made of aluminum or a base replacing this material. To create the correct shape, you need a device that is aimed at bending metal structures. Such chairs will be perfectly located on any surface, even uneven. Most importantly, choose a durable fabric for fitting and high quality fasteners.
Folding chairs with upright legs and back. Of course, such a seat is the most comfortable and suitable for a long stay on it. Thanks to the backrest, you can sit comfortably and fully enjoy the process of fishing. The only drawback of such a product is that for its implementation and arrangement, you need good experience in working with such products. An angler who does not have the skills to implement such products may encounter difficulties in arranging this type of fishing chair. An area in which a lure angler usually fishes. It is mountainous, smooth, winding;

When choosing an option for creating a chair with your own hands, you need to consider many factors:

Weight category of the angler. Of course, if a person weighs more than one hundred kilograms, then it is necessary to equip the chair equipment from thicker and more durable structures;
Fishing time. If a person chooses to go fishing for a few hours, then any chair will do. If access to the reservoir for the purpose of catching is planned for the whole day or night, then you need to think through the comfort of the product as much as possible;
Season. This factor is very important. If in the summer it is possible to design a chair with low grounding, then for the winter period of fishing, the seat of the fisherman's chair should be as high as possible above the surface of the earth or ice so that the catcher does not catch a cold or freeze.
Finding a reservoir. If it is located close, then even heavy chair structures can be built. In the case of a location far from the lady where fishing takes place, it is necessary to pay attention to the lightness of the product.

What materials can the chair be made from?

Going into the pantry or garage, you can find a lot of accessories, of which, it would seem, it is quite possible to make a high chair. What materials should be preferred when choosing elements for creating a chair with your own hands?

Naturally, the durability and reliability of the fishing chair directly depends on the quality and strength of the materials, so try to choose the best possible details to create your product:

Any aluminum structures can be used. Most often, it is used, because this material is easy to bend, does not corrode and is durable in its service. Most often, the basis of a folding structure is constructed from this material and additional membranes, jumpers, which will help in stability and additional functions.
Screws, bolts and ties will also come in handy, with the help of which all functional and moving parts of the chair will be fixed for arranging a fishing place.
Leather. If there are pieces of leather from old jackets or any products found in the pantry or garage, do not rush to get rid of them, because they can come in handy in the process of designing a fishing chair for a fruitful catch.
Tarpaulin. This material is ideal for stretching. It is this element that is often used by jacks of all trades when organizing the landing site and backrest directly, if it is provided for according to the drawing. This material is durable and will help maintain the integrity of the product.
Rivets and other similar items. They will help to fix the fabric of the seat firmly and tightly. To make the product comfortable and suitable for any weight category, you can attach such parts along the entire seat and back.
Thick threads can also be useful in the process of attaching fabric elements to the design of the fisherman's chair.
Glue. Be sure to need to attach additional pieces of fabric to the seat. Also, glue can be useful for fixing fixed structural elements.
Fabric tapes. If they are elastic and at the same time strong, they can easily become the supporting and holding parts of chair structures.

Depending on the imagination and the planned design of a chair for equipping a fishing place, you can use almost any element found in the bins. Everything is useful here, and various pillows, and metal pieces, and fastener particles from any unnecessary products.

How to catch more fish?

I have been active fishing for quite some time and have found many ways to improve the bite. And here are the most effective ones:

. Attracts fish in cold and warm water with the help of pheromones included in the composition and stimulates their appetite. It is a pity that Rosprirodnadzor wants to ban its sale.
More sensitive gear. Reviews and instructions for other types of gear you can find on the pages of my site.
Lures using pheromones.

You can get the rest of the secrets of successful fishing for free by reading my other materials on the site.

Folding fishing chair on four legs

Popular among fishermen are chairs with four legs. It is not difficult to make it if you have at least small skills in creating such structures with your own hands.

For the construction of the design of this chair, you will need the following elements:

Aluminum, metal or wooden bars of the same length;
PVA glue or moment, as well as mounting screws and screws;
Nuts for fastening moving elements;
A steel bar that will serve as the basis for the folding component of the structure;
Supports from the material chosen for the manufacture of the main part of the chair;
Form of metal or wood for seating;
The fabric that will fit the seat and back of the product;
Fabric or spring elements to fix the product during installation;
Scissors, knife, blade for trimming excess parts;
Drawing paper and pencil.

In order to proceed with the direct implementation of the construction of a seat for a fisherman, you need to prepare a workplace. It should be spacious and compact so that all the parts used in production can be placed at arm's length.

First of all, you need to collect the elements that will add up. Namely, to attach a steel bending rod to the legs and back of the future chair.
Then you need to connect the legs alternately among themselves. using glue and fastening moving elements.
After that, attach a square with a good glue., in the place of which there will be a seat for the fisherman.
When all glued particles harden, you can begin to attach the fabric to the seat. It is necessary to pull the material tightly and attach it with buttons, threads or a stapler.
After the actions taken the matter remains small, you need to make design ideas, if they are supposed.
It is best if the chair stands outdoors. within a day, so that all elements are securely fixed and the product can be used for its intended purpose.

It is necessary to carefully consider the design of the chair so that it is comfortable and wear-resistant;
To create a fishing chair, you should use the highest quality elements so that the product is strong and durable;
Be sure to take into account the area for fishing in order to choose the right chair design;
Of course, you need to take into account the weight category of the fisherman when you start creating a drawing for creating a chair with your own hands;
Before going fishing, check the chair for strength, you can put something heavy on top, close to the weight of a fishing lover;
It is best to choose a color scheme that suits the natural environment. So that sitting on a chair does not cause unpleasant emotions and experiences.

Perhaps, it is very difficult to meet men who would not be fond of fishing. It is also safe to say that among them there are very few fishermen who go fishing only with gear.

In order to make fishing as comfortable as possible, you need to have a special fishing chair with you.

Most modern anglers prefer to spend time doing what they love, at least with relative comfort. For many, a small chair is enough for this. To become its owner, it is not necessary to go to a specialized store, because fishing on your own is very simple. How and from what it is made will be described below.

Materials and tools

A very simple structure based on 3 legs, which can be carried on a belt or in a case, can be made by a person who does not have carpentry skills.

It is stable on any surface. The fishing chair is assembled from:

3 wooden round rods 600 x 40 mm (they can be made from even cuttings for garden tools);
screws or studs 100 x 6 mm;
6mm loop screw;
2 nuts;
6 washers;
3 screws for wood;
a triangular piece of dense fabric, tarpaulin or leather 280 x 280 x 280 mm;
self-tapping screw with a loop for attaching a carrying strap.

You will also need:

impregnation for wood and varnish;
drill;
screwdriver;
screwdriver and wrench;
scissors for cutting material or a knife for cutting thick leather;
sandpaper and file;
wood saw;
hacksaw for metal.

Back to index

Chair making

Now about how to make a chair for fishing. Cut the cuttings (the strongest and most durable legs will be made from birch) into 3 pieces of 600 mm. Drill holes in each of them at a distance of 260 mm from one of the edges. Fasteners should fit tightly into them, so use a 6 mm drill for drilling. The longer sides of the chair legs will rest on the ground, while the shorter sides will form the base for the seat. Drill blind holes in the centers of the upper ends for screwing in self-tapping screws.

On one of the legs, prepare a hole for screwing in the fastener for the belt. Treat the rods with impregnation, stain, varnish or paint. While the blanks are drying, cut the material for the seat according to the dimensions indicated above. On one of its corners, make a loop for attaching a portable strap, but you can also make a non-removable strap by screwing its edge along with the seat to the legs. The carrier can be made from a strap from a travel or handbag, or cut from leather tape or other material. Don't forget to make a loop to secure the bottom of the legs during transport.

Now everything is ready to assemble a chair with your own hands. Place a washer on the 100 x 6 screw and insert it into one of the legs. Install the loop of the second screw and another leg on it. Put on the washer and nut and tighten the structure with a screwdriver and wrench. Also install a wooden rod, washer and nut on the hinge screw and tighten the fasteners. Cut off the thread protruding after tightening the nuts with a hacksaw. File the cuts. The seat is screwed to the legs with self-tapping screws. Washers must be under their hats. The larger their diameter, the better. Screw a screw with a loop to one of the legs, equip the product with a belt, and the fishing chair is ready. Its legs can be equipped with steel or plastic pads or nozzles. They will serve as an additional protection for wood from external influences and another factor in the stability of the chair.

Are you a fishing lover? If yes, then you should definitely know that nothing is better than a good bite for a fisherman. Or does it happen? During trips, fishermen very often forget about their comfort, sitting on rotten stumps and bumps. Why not get comfortable furniture for this type of holiday? The bottom line is that not all buyers are willing to give extra money to purchase an expensive chair. It is for this reason that today we will reveal the topic: Do-it-yourself folding fishing chair - drawings, assembly.

Fishing chairs - what are they?

Obviously, you can invent a huge variety of different variations of one chair, but for understanding, you should consider the main types of furniture for fishing:

Sunbed. It's no secret that while fishing you get tired of sitting, and you want to lie down a bit, because sitting without a back for a long time is a big load.

Important! Among inexperienced fishermen there is a prejudice that it will be possible to make the necessary efforts only while standing. In fact, it is necessary to stand only if you are going for a catfish or a pike - to catch the same carp, you can fish lying down.

A chair with a back is the most common interpretation. It is this option that allows you to relax your back and completely surrender to the process. Also, no one interferes with attaching armrests to such a chair in order to sit like a king.
A tackle and catch box is another common option. This design allows you to both position and stack your prey at the same time, which adds mobility and saves a little time.
Well, a simple folding chair. This solution has the smallest dimensions, which makes it the most convenient to carry. Also, such a device will be the easiest to manufacture.

How to make a folding fishing chair with your own hands? If you are after comfort, then you will need to achieve the best quality.

Comfort level

If we talk about the quality of home-made furniture, then you should immediately mean your own level of professionalism and the quality of the parts used:

If you have never made such structures before and do not have the finances for good tools and materials, do not take up this craft with your own hands.
But if you are interested in this, then we will assume that you have experience in construction and assembly.
Also, a good material, a set of tools and basic skills in technical education would not hurt, which will help you distinguish a sketch from a drawing and understand their purposes.

Only with the fulfillment of all these conditions will you be able to assemble the highest quality chair that can please you for more than five years.

What is the device? Let's deal with this.

Design features of fishing furniture:

Folding beds consist of two planes, which are connected by two loops and are equipped with a toilet seat made of fabric. For this reason, chairs of this type are the easiest to assemble.

Important! You can make it entirely out of wood, but it takes a little more effort.

Drawer with drawers. It is something similar to a home cabinet, from which a shelf can be pulled out. There is only one difference between these pieces of furniture - a back will be attached on top of the fishing chair.

Important! Materials can be used in a variety of ways. Wood, leather, fabric and other materials are suitable for our business.

The design with the back and armrests can be made one piece, or it can also be foldable. The first option will provide you with guarantees of strength and reliability, but there will be problems with mobility. With the second, everything is exactly the opposite, only regular care is required.

Important! The design features of a solid object can not even be discussed, and folding furniture has a back with two legs, to which the other two legs are attached, fixed with movable bolts, pins.

Sunbed, which will be the most difficult to make. You can find many options for its execution, ranging from folding to monolithic.

How to make a fishing chair with your own hands? You need to choose the best materials for this business.

Choosing materials

Usually any tree or chipboard is used. Nobody forbids you to use metal structures, just not every fisherman has a welding machine and steel processing tools.

Why is steel mentioned? Yes, this is the best option. This material is very strong, durable, and coating with a special varnish will make such a chair generally immortal.

Important! The same aluminum will suffer greatly after its first operation. It is optimal to use wood, because it is the most affordable and simplest material.

In order to ensure a high-quality connection of moving parts, you will need to acquire bolts, nuts, steel studs. Pins, cloth and leather will also be found.

Sequencing

With the theory sorted out and now you can move on to practice. Let's look at the general order for all four types of furniture.

Main Rules

Any of the above designs has almost the same assembly principle. First you need to make a calculation and draw up a drawing of a fishing chair. The easiest way is to start with a sketch without focusing on size, device and construction. Then you need to select the details of which the design will consist.

Just write down all the elements in a column, for example:

Two legs.
Back with legs.
Fabric chair.
Four bolts.

If you have decided on the component parts, then you will need to get hold of a certain number of fasteners.

Important! You should also make marks on the sketch with the places where the parts will be connected. If the sketch has been made, you can begin to build a drawing.

We build a drawing

Even from school drawing lessons there was such a thing as “projection”. Also, everyone at school was taught the construction of drawings. If you managed to forget everything, then you should not panic, because you simply need to depict the product from its three sides: front, side, top. These three types are called projections. The first view must be placed on the left side, the second view on the right, and the third view on the bottom.

Every avid fisherman should have one on which he will sit by the pond and fish. The presence of such a piece of furniture will make fishing more comfortable and enjoyable.

Some people think that you can do without a fishing chair. But if you plan to fish for a long time, then you can not do without it. Moreover, it is not at all necessary to purchase a ready-made chair in the store. It is quite easy and simple to do it yourself from improvised means.

As for the design features, the chairs for fishing are:

Whichever option you choose, the fishing chair should turn out:

durable;
sustainable;
small in weight;
compact and mobile;
easy to manufacture;
convenient to use.

But it is worth noting that folding models are considered the most popular among fishermen. They do not take up much space and are easy to carry from place to place. Most often, such products are made of wooden slats, metal pipes, plastic parts.

Attention: in the process of making a chair, it is worth considering your own weight and height.

Material selection

You can make a chair for fishing from any materials. The most popular are:

Drawing

Before making a fishing chair, it is better to make a drawing of it. So it will be more convenient for you to cut materials and assemble the structure into a single whole. What is a drawing? This is an image of a future piece of furniture in three different projections: front, side and top. On this drawing, it is necessary to indicate the number of parts, their exact dimensions and options for attaching individual elements to each other. The optimal dimensions of a chair for fishing are:

width from 270 to 500 mm;
height from 270 to 470 mm.

Almost any fishing chair will consist of the following elements:

two legs;
backs with legs;
seats;
bolts.

Some models are equipped with armrests, footrests and other accessories. But these are already more complex and expensive fishing chairs to manufacture.

Reference: a competent drawing will allow you to calculate how much consumable material is useful in the process of making a chair.

Tools

Of the tools in the process of manufacturing and assembling a wooden fishing chair, you will need:

Of the materials useful:

lumber;
bolts and nuts;
paints and varnishes;
brushes.

How to make a folding fishing option out of wood?

Let's look at the manufacture of the simplest design of a wooden fishing chair on 4 legs. To do this, we need several wooden bars with a square section of 35 - 40 cm, from which the legs of the product will be made. The process of making a chair will look like this::

In order for the chair to last as long as possible, it should be treated with antiseptics and covered with a water-repellent varnish in two layers.

Attention: in order for the folding fishing chair to fold and unfold easily, it is necessary to correctly adjust the tension of the bolts.

Simple fishing design made of PVC plastic pipes

This version of the chair is assembled in a matter of hours according to the following scheme:

Photo

As a result, you will receive a product similar to the following photos:

Useful video

A detailed description of how to make a chair out of wood is presented in the video:

An example of making a chair from PVC pipes is shown in the following video:

Conclusion

In conclusion, it is worth noting, no matter what option you choose, a fishing chair assembled by yourself will delight you not only by saving your own savings, but also by practicality, convenience and attractive appearance. Each individual stool design is comfortable in its own way and it will satisfy all the needs of its owners.

In contact with